Network Working Group E. Beili
Internet-Draft Actelis Networks
Intended status: Standards Track May 31, 2010
Expires: December 2, 2010
xDSL multi-pair bonding using Time-Division Inverse Multiplexing
(G.Bond/TDIM) MIB
draft-ietf-adslmib-gbond-tdim-mib-03.txt
Abstract
This document defines Management Information Base (MIB) module for
use with network management protocols in TCP/IP based internets.
This document proposes an extension to the GBOND-MIB module with a
set of objects for managing multi-pair bonded xDSL interfaces using
Time-Division Inverse Multiplexing (TDIM), defined in ITU-T
recommendation G.998.3.
Status of This Memo
This Internet-Draft is submitted in full conformance with the
provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet-
Drafts is at http://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
This Internet-Draft will expire on December 2, 2010.
Copyright Notice
Copyright (c) 2010 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
Beili Expires December 2, 2010 [Page 1]
Internet-Draft G.Bond/TDIM MIB May 2010
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 3
2. The Internet-Standard Management Framework . . . . . . . . . . 3
3. The Broadband Forum Management Framework for xDSL Bonding . . 3
4. Relationship to other MIB modules . . . . . . . . . . . . . . 3
4.1. Relationship to Interfaces Group MIB module . . . . . . . 4
4.2. Relationship to G.Bond MIB module . . . . . . . . . . . . 4
5. MIB Structure . . . . . . . . . . . . . . . . . . . . . . . . 4
5.1. Overview . . . . . . . . . . . . . . . . . . . . . . . . . 4
5.2. Link Protection Configuration . . . . . . . . . . . . . . 5
5.3. Service Configuration . . . . . . . . . . . . . . . . . . 5
5.3.1. Management of TDM Services and service drop
priority during bandwidth degradation . . . . . . . . 6
5.3.2. Service Notifications . . . . . . . . . . . . . . . . 6
5.4. Performance Monitoring . . . . . . . . . . . . . . . . . . 6
5.5. Mapping of Broadband Forum TR-159 and ITU-T G.998.3
Managed Objects . . . . . . . . . . . . . . . . . . . . . 7
6. G.Bond/TDIM MIB Definitions . . . . . . . . . . . . . . . . . 8
7. Security Considerations . . . . . . . . . . . . . . . . . . . 50
8. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 51
9. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 51
10. References . . . . . . . . . . . . . . . . . . . . . . . . . . 51
10.1. Normative References . . . . . . . . . . . . . . . . . . . 51
10.2. Informative References . . . . . . . . . . . . . . . . . . 52
Beili Expires December 2, 2010 [Page 2]
Internet-Draft G.Bond/TDIM MIB May 2010
1. Introduction
The Multi-pair bonding using time-division inverse multiplexing
(TDIM), a.k.a. G.Bond/TDIM, is specified in ITU-T G.998.3
recommendation [G.998.3], which defines a method for bonding (or
aggregating) of multiple xDSL lines (or individual bearer channels in
multiple xDSL lines) into a single bi-directional logical link,
carrying a mix of various traffic streams, e.g. Ethernet,
Asynchronous Transfer Mode (ATM), Time-Division Multiplexing (TDM).
The MIB module, defined in this document, provides G.Bond/
TDIM-specific objects for the management of G.998.3 bonded
interfaces, extending the common bonding objects specified in GBOND-
MIB [I-D.ietf-adslmib-gbond-mib] module.
2. The Internet-Standard Management Framework
For a detailed overview of the documents that describe the current
Internet-Standard Management Framework, please refer to section 7 of
RFC 3410 [RFC3410].
Managed objects are accessed via a virtual information store, termed
the Management Information Base or MIB. MIB objects are generally
accessed through the Simple Network Management Protocol (SNMP).
Objects in the MIB are defined using the mechanisms defined in the
Structure of Management Information (SMI). This memo specifies a MIB
module that is compliant to the SMIv2, which is described in STD 58,
RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC 2580
[RFC2580].
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in RFC 2119 [RFC2119].
3. The Broadband Forum Management Framework for xDSL Bonding
This document makes use of the Broadband Forum technical report
Management Framework for xDSL Bonding [TR-159], defining a management
model and a hierarchy of management objects for the bonded xDSL
interfaces.
4. Relationship to other MIB modules
This section outlines the relationship of the MIB modules defined in
this document with other MIB modules described in the relevant RFCs.
Specifically, the following MIB modules are discussed: Interfaces
Group MIB (IF-MIB) and G.Bond MIB (GBOND-MIB).
Beili Expires December 2, 2010 [Page 3]
Internet-Draft G.Bond/TDIM MIB May 2010
4.1. Relationship to Interfaces Group MIB module
A G.Bond/TDIM port is a private case of a Bonded multi-pair xDSL
interface and as such is managed using generic interface management
objects defined in the IF-MIB [RFC2863]. In particular an interface
index (ifIndex) is used to index instances of G.Bond/TDIM ports, as
well as xDSL lines/channels, in a managed system.
4.2. Relationship to G.Bond MIB module
GBOND-MIB [I-D.ietf-adslmib-gbond-mib] module defines management
objects common for all Bonded multi-pair xDSL interfaces. In
particular it describes the bonding management, bonded port and
channel configuration, initialization sequence etc.
Both GBOND-MIB and GBOND-TDIM-MIB modules are REQUIRED to manage a
G.Bond/TDIM port.
5. MIB Structure
5.1. Overview
All management objects defined in the GBOND-TDIM-MIB module are
contained in a single group gBondTdimPort. This group is further
split into 6 sub-groups, structured as recommended by RFC 4181
[RFC4181]:
o gBondTdimPortNotifications - containing notifications (TDIM
Service Down/Up).
o gBondTdimPortConfTable - containing objects for configuration of a
G.Bond/TDIM port.
o gBondTdimPortCapabilityTable - containing objects reflecting
capability of a G.Bond/TDIM port.
o gBondTdimPortStatusTable - containing objects providing overall
status information of a G.Bond/TDIM port, complementing the
generic status information from the ifTable of IF-MIB and
gBondFltStatus of GBOND-MIB.
o gBondTdimServiceTable - containing objects for configuration and
status of the services in a G.Bond/TDIM port.
o gBondTdimPM - containing objects for an OPTIONAL Historical
Performance Monitoring (PM) of a G.Bond/TDIM port.
Beili Expires December 2, 2010 [Page 4]
Internet-Draft G.Bond/TDIM MIB May 2010
5.2. Link Protection Configuration
G.Bond/TDIM specification allows an optional Forward Error Correction
(FEC) and Interleaver block, which, if supported and enabled,
provides a degree of protection against micro-interruptions, alien
noise, and even individual Bonding Channel Entity (BCE) failures,
a.k.a. cut-line protection.
Management objects in the gBondTdimPortConfTable can be used to
configure and quiery the FEC and Interleaver function of the G.Bond/
TDIM port.
5.3. Service Configuration
Unlike the other two xDSL Multi-Pair Bonding schemes (G.Bond/ATM and
G.Bond/Ethernet), which send the information required for reassembly
of the fragmented data along with the data, G.Bond/TDIM is a
synchronous scheme, requiring both ends to know the data distribution
tables before any actual data transfer can happen.
Management objects in the gBondTdimPortConfTable
(gBondTdimAdminServices), gBondTdimServiceTable and
gBondTdimOperServiceTable can be used to configure and quiery the
configuration of services transported via the G.Bond/TDIM link. The
services may be configured independently of the link state (i.e. in-
and out-of-service), as G.998.3 communicates changes in the service
configuration via specific Bonding Communication Channel (BCC)
messages, switching both ends of the link to the new configuration
synchronously.
There can be up to 60 active services defined on a G.Bond/TDIM link.
This MIB module provides an ability to define up to 255 services via
the gBondTdimServiceTable, with each row representing a possible
service, and then set the actual service configuration using the
gBondTdimAdminServices object (a byte-vector of service indices),
listing the active services in order of their position in the G.Bond/
TDIM frame. This design allows one to easily modify service drop
priority, which directly corresponds to the service position.
The actual list of services is provided via read-only
gBondTdimOperServiceTable, where each entry's index corresponds to
the service position, starting from index 1 for the first entry, 2
for the second entry etc., providing an easy service navigation for a
management application using GET-NEXT (instead of counting bytes in
the gBondTdimAdminServices object).
The service configuration can only be changed on a BTU-C side.
Beili Expires December 2, 2010 [Page 5]
Internet-Draft G.Bond/TDIM MIB May 2010
When configuring the services, please bear in mind that the sum of
all the services' bandwidth SHOULD be less or equal to the target
data rate of the bonded link. Note that G.Bond/TDIM links are
symmetrical, i.e. their upstream data rate equals to the downstream
data rate.
5.3.1. Management of TDM Services and service drop priority during
bandwidth degradation
G.Bond/TDIM protocol provides an ability to map TDM services into the
TDIM bonded link directly, without any additional overhead. It
addresses only structure-agnostic TDM transport, disregarding any
structure that may be imposed on these streams, in particular the
structure imposed by the standard TDM framing [G.704].
During bandwidth degradation services with a lower priority are
impaired or dropped first. Synchronous services (fractional DS1/E1,
clear channel E1/T1, T3/E3, clock) positioned in the beginning of the
G.Bond/TDIM frame, have higher priority than asynchronous services
(Ethernet, ATM, GFP encapsulated), positioned farther away. Within
the services of the same type, those with lower position (index) have
higher priority.
5.3.2. Service Notifications
This MIB module provides specific Up/Down notifications
(gBondTdimServiceUp/gBondTdimServiceDown) for each of the configured
services. During bandwidth degradation a number of services may be
suspended (dropped) simultaneously, according to their drop priority
(position in the service list). Please note that it is possible for
a higher priority service to be dropped before a lower priority one.
For example, suppose there are two services configured on a 2 Mbps
G.Bond/TDIM link: a T1 service (gBondTdimServiceType with a value of
ds1, with a bandwidth requirement of 1.5 Mbps) and an Ethernet
service with a size of 0.5 Mbps. When the actual link bandwidth is
reduced to 1.4 Mbps, the T1 service with a gBondTdimServicePosition
value of 1 would be dropped, while the Ethernet service with a
gBondTdimServicePosition value of 2 would remain up.
5.4. Performance Monitoring
The OPTIONAL performance monitoring counters, thresholds and history
buckets (interval-counters), simlar to those defined in [TR-159] are
implemented using the textual conventions defined in the HC-PerfHist-
TC-MIB [RFC3705]. The HC-PerfHist-TC-MIB defines 64-bit versions of
the textual conventions found in PerfHist-TC-MIB [RFC3593].
The agent SHOULD align the beginning of each interval to a fifteen
Beili Expires December 2, 2010 [Page 6]
Internet-Draft G.Bond/TDIM MIB May 2010
minute boundary of a wall clock. Likewise, the beginning of each one
day intervals SHOULD be aligned with the start of a day.
Counters are not reset when a G.Bond TDIM port is reinitialized, but
rather only when the agent is reset or reinitialized (or under
specific request outside the scope of this MIB module).
5.5. Mapping of Broadband Forum TR-159 and ITU-T G.998.3 Managed
Objects
This section contains the mapping between relevant managed objects
(attributes) defined in [TR-159] and managed objects defined in this
document. Note that all management objects defined in [G.998.3] have
corresponding objects in [TR-159].
+-----------------------------+-------------------------------------+
| TR-159 Managed Object | Corresponding SNMP Object |
+-----------------------------+-------------------------------------+
| oBondTDIM - Basic Package | |
| (Mandatory) | |
+-----------------------------+-------------------------------------+
| aCRC4Errors | gBondTdimCrc4Errors |
+-----------------------------+-------------------------------------+
| aCRC6Errors | gBondTdimCrc6Errors |
+-----------------------------+-------------------------------------+
| aCRC8Errors | gBondTdimCrc8Errors |
+-----------------------------+-------------------------------------+
| aFECSupported | gBondTdimFecSupported |
+-----------------------------+-------------------------------------+
| oBondTDIM - FEC Package | |
| (Optional) | |
+-----------------------------+-------------------------------------+
| aFECAdminState | gBondTdimFecAdminState |
+-----------------------------+-------------------------------------+
| aFECOperState | gBondTdimFecOperState |
+-----------------------------+-------------------------------------+
| aFECWordSize | gBondTdimFecWordSize |
+-----------------------------+-------------------------------------+
| aFECRedundancySize | gBondTdimFecRedundancySize |
+-----------------------------+-------------------------------------+
| aFECInterleaverType | gBondTdimFecInterleaverType |
+-----------------------------+-------------------------------------+
| aFECInterleaverDepth | gBondTdimFecInterleaverDepth |
+-----------------------------+-------------------------------------+
| aFECMaxWordSize | gBondTdimFecMaxWordSize |
+-----------------------------+-------------------------------------+
| aFECMaxRedundancySize | gBondTdimFecMaxRedundancySize |
+-----------------------------+-------------------------------------+
Beili Expires December 2, 2010 [Page 7]
Internet-Draft G.Bond/TDIM MIB May 2010
+-----------------------------+-------------------------------------+
| aFECInterleaverTypesSupport | gBondTdimFecInterleaverTypeSupporte |
| ed | d |
+-----------------------------+-------------------------------------+
| aFECMaxInterleaverDepth | gBondTdimFecMaxInterleaverDepth |
+-----------------------------+-------------------------------------+
| oTDIMService - Basic | |
| Package (Mandatory) | |
+-----------------------------+-------------------------------------+
| aServiceID | gBondTdimServicePosition |
+-----------------------------+-------------------------------------+
| aServiceIfIdx | gBondTdimServiceIfIdx |
+-----------------------------+-------------------------------------+
| aServiceType | gBondTdimServiceType |
+-----------------------------+-------------------------------------+
| aServiceSize | gBondTdimServiceSize |
+-----------------------------+-------------------------------------+
| aServiceOperState | gBondTdimServiceOperState |
+-----------------------------+-------------------------------------+
| aServiceUpDownEnable | gBondTdimServiceUpDownEnable |
+-----------------------------+-------------------------------------+
| nServiceUp | gBondTdimServiceUp |
+-----------------------------+-------------------------------------+
| nServiceDown | gBondTdimServiceDown |
+-----------------------------+-------------------------------------+
Table 1: Mapping of TR-159 Managed Objects
6. G.Bond/TDIM MIB Definitions
GBOND-TDIM-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
NOTIFICATION-TYPE,
mib-2,
Unsigned32,
Counter32
FROM SNMPv2-SMI -- [RFC2578]
TEXTUAL-CONVENTION,
RowStatus,
TruthValue
FROM SNMPv2-TC -- [RFC2579]
MODULE-COMPLIANCE,
OBJECT-GROUP,
NOTIFICATION-GROUP
FROM SNMPv2-CONF -- [RFC2580]
Beili Expires December 2, 2010 [Page 8]
Internet-Draft G.Bond/TDIM MIB May 2010
ifIndex,
InterfaceIndex
FROM IF-MIB -- [RFC2863]
HCPerfCurrentCount,
HCPerfIntervalCount,
HCPerfValidIntervals,
HCPerfInvalidIntervals,
HCPerfTimeElapsed
FROM HC-PerfHist-TC-MIB -- [RFC3705]
;
------------------------------------------------------------------------
gBondTdimMIB MODULE-IDENTITY
LAST-UPDATED "201005310000Z" -- May 31, 2010
ORGANIZATION "IETF ADSL MIB Working Group"
CONTACT-INFO
"WG charter:
http://www.ietf.org/html.charters/adslmib-charter.html
Mailing Lists:
General Discussion: adslmib@ietf.org
To Subscribe: adslmib-request@ietf.org
In Body: subscribe your_email_address
Chair: Menachem Dodge
Postal: ECI Telecom, Ltd.
30 Hasivim St.,
Petach-Tikva 49517
Israel
Phone: +972-3-926-8421
EMail: menachem.dodge@ecitele.com
Editor: Edward Beili
Postal: Actelis Networks, Inc.
25 Bazel St., P.O.B. 10173
Petach-Tikva 10173
Israel
Phone: +972-3-924-3491
EMail: edward.beili@actelis.com"
DESCRIPTION
"The objects in this MIB module are used to manage the
multi-pair bonded xDSL Interfaces using time-division inverse
multiplexing (TDIM), defined in ITU-T recommendation G.998.3
(G.Bond/TDIM).
This MIB module MUST be used in conjunction with GBOND-MIB
module, common to all G.Bond technologies.
Beili Expires December 2, 2010 [Page 9]
Internet-Draft G.Bond/TDIM MIB May 2010
The following references are used throughout this MIB module:
[G.998.3] refers to:
ITU-T Recommendation G.998.3: 'Multi-pair bonding using
time-division inverse multiplexing', January 2005.
[TR-159] refers to:
Broadband Forum Technical Report: 'Management Framework for
xDSL Bonding', December 2008.
Naming Conventions:
BCE - Bonding Channel Entity
CO - Central Office
CPE - Customer Premises Equipment
GBS - Generic Bonding Sublayer
GBS-C - Generic Bonded Sub-layer, CO side
GBS-R - Generic Bonded Sub-layer, RT (or CPE) side
SNR - Signal to Noise Ratio
Copyright (C) The IETF Trust (2010).
This version of this MIB module is part of RFC YYYY;
see the RFC itself for full legal notices."
REVISION "201005310000Z" -- May 31, 2010
DESCRIPTION "Initial version, published as RFC YYYY."
-- EdNote: Replace YYYY with the actual RFC number &
-- remove this note
::= { mib-2 ZZZ }
-- EdNote: Replace ZZZ with a real OID once it is
-- allocated & remove this note.
-- Sections of the module
-- Structured as recommended by [RFC4181], Appendix D
gBondTdimObjects OBJECT IDENTIFIER ::= { gBondTdimMIB 1 }
gBondTdimConformance OBJECT IDENTIFIER ::= { gBondTdimMIB 2 }
-- Groups in the module
gBondTdimPort OBJECT IDENTIFIER ::= { gBondTdimObjects 1 }
-- Textual Conventions
GBondTdimServiceIndex ::= TEXTUAL-CONVENTION
Beili Expires December 2, 2010 [Page 10]
Internet-Draft G.Bond/TDIM MIB May 2010
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"A unique value, greater than zero, for each Service defined
in the managed G.Bond/TDIM port.
It is RECOMMENDED that values are assigned contiguously
starting from 1. The value for each Service MUST remain
constant at least from one re-initialization of the entity's
network management system to the next re-initialization."
SYNTAX Unsigned32 (1..255)
GBondTdimServiceIndexList ::= TEXTUAL-CONVENTION
DISPLAY-HINT "1d:"
STATUS current
DESCRIPTION
"This textual convention represents a continuous ordered list of
all the servies defined for the managed G.Bond/TDIM port.
The value of this object is a concatenation of zero or more (up
to 60) octets, where each octet contains an 8-bit
GBondTdimServiceIndex value, identifying a particular service.
An octet's position reflects the associated service position
and its priority in the G.Bond/TDIM frame, with 1st octet being
the 1st service of highest priority.
A zero-length octet string is object-specific and MUST
therefore be defined as part of the description of any object
that uses this syntax. Examples of the usage of a zero-length
value might include situations where an object using this
textual convention is irrelevant for a specific G.Bond/TDIM port
type or that no services have been defined for this port."
SYNTAX OCTET STRING (SIZE(0..60))
GBondTdimServiceOrderIndex ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"A unique value, greater than zero, for each Service defined
in the managed G.Bond/TDIM port, showing its relative position
inside the G.Bond/TDIM frame."
SYNTAX Unsigned32 (1..60)
-- Port Notifications Group
gBondTdimPortNotifications OBJECT IDENTIFIER
::= { gBondTdimPort 0 }
gBondTdimServiceUp NOTIFICATION-TYPE
OBJECTS {
Beili Expires December 2, 2010 [Page 11]
Internet-Draft G.Bond/TDIM MIB May 2010
-- ifIndex is not needed here since we are under specific GBS
gBondTdimServicePosition,
gBondTdimServiceIfIdx,
gBondTdimServiceOperState
}
STATUS current
DESCRIPTION
"This notification indicates that a service indicated by the
gBondTdimServicePosition (mapped to a particular interface
indicated by the gBondTdimServiceIfIdx) in a particular
G.Bond/TDIM port' is passing traffic.
This notification MAY be send for the G.Bond/TDIM port, while
the port is Up, when the gBondTdimServiceOperState object has
left the Down state.
Generation of this notification is controlled by the
gBondTdimServiceUpDownEnable object.
This object maps to the TR-159 notification nServiceUp."
REFERENCE
"[TR-159] 5.5.5.7"
::= { gBondTdimPortNotifications 1 }
gBondTdimServiceDown NOTIFICATION-TYPE
OBJECTS {
-- ifIndex is not needed here since we are under specific GBS
gBondTdimServicePosition,
gBondTdimServiceIfIdx,
gBondTdimServiceOperState
}
STATUS current
DESCRIPTION
"This notification indicates that a service indicated by the
gBondTdimServicePosition (mapped to a particular interface
indicated by the gBondTdimServiceIfIdx) in a particular
G.Bond/TDIM port' has stopped passing the traffic.
This notification MAY be send for the G.Bond/TDIM port, while
the port is Up, when the gBondTdimServiceOperState object has
entered the Down state.
Generation of this notification is controlled by the
gBondTdimServiceUpDownEnable object.
This object maps to the TR-159 notification nServiceDown."
REFERENCE
"[TR-159] 5.5.5.8"
Beili Expires December 2, 2010 [Page 12]
Internet-Draft G.Bond/TDIM MIB May 2010
::= { gBondTdimPortNotifications 2 }
-- G.Bond/TDIM Port group
gBondTdimPortConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF GBondTdimPortConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for Configuration of G.Bond/TDIM ports. Entries in
this table MUST be maintained in a persistent manner"
::= { gBondTdimPort 1 }
gBondTdimPortConfEntry OBJECT-TYPE
SYNTAX GBondTdimPortConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the G.Bond/TDIM Port Configuration table.
Each entry represents an G.Bond/TDIM port indexed by the
ifIndex. Additional conifguration parameters are available
via the gBondPortConfEntry of GBOND-MIB.
Note that an G.Bond/TDIM port runs on top of a single or
multiple BCE port(s), which are also indexed by ifIndex."
INDEX { ifIndex }
::= { gBondTdimPortConfTable 1 }
GBondTdimPortConfEntry ::=
SEQUENCE {
gBondTdimFecAdminState TruthValue,
gBondTdimFecWordSize Unsigned32,
gBondTdimFecRedundancySize Unsigned32,
gBondTdimFecInterleaverType INTEGER,
gBondTdimFecInterleaverDepth Unsigned32,
gBondTdimAdminServices GBondTdimServiceIndexList,
gBondTdimServiceUpDownEnable TruthValue
}
gBondTdimFecAdminState OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A desired state of the OPTIONAL Forward Error Correction
(FEC) function of the G.Bond/TDIM port.
A value of 'false' indicates that the FEC function SHALL be
disabled. A value of 'true' indicates that the FEC SHALL be
Beili Expires December 2, 2010 [Page 13]
Internet-Draft G.Bond/TDIM MIB May 2010
enabled, if supported by the G.Bond/TDIM port, as indicated
by the gBondTdimFecSupported object.
The gBondTdimFecOperState object indicates current
operational state of the FEC function.
For the GBS-R ports, the value of this object cannot be
changed directly. This value may be changed as a result of
writing operation on the gBondTdimFecSupported object of a
remote GBS-C.
Modifications of this object MUST be performed when the link
is Down.
Attempts to change this object MUST be rejected, if the link is
Up or Initializing or if it is an GBS-R.
This object MUST be maintained in a persistent manner.
This object maps to TR-159/G.998.3 attribute aFECAdminState."
REFERENCE
"[TR-159] 5.5.4.5; [G.998.3] Appendix II, B-X"
::= { gBondTdimPortConfEntry 1 }
gBondTdimFecWordSize OBJECT-TYPE
SYNTAX Unsigned32(0|20..255)
UNITS "octets"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A FEC code word size in octets for the G.Bond/TDIM ports
supporting FEC function.
This object is read-write for the GBS-C ports and read-only
for the GBS-R.
A value of zero SHALL be returned if the FEC is disabled
(via gBondTdimFecAdminState) or not supported.
Changing of the FEC code word size MUST be performed when the
FEC enabled link is Down. Attempts to change this object MUST
be rejected, if the link is Up or Initializing or the
FEC function is disabled/not supported.
This object MUST be maintained in a persistent manner.
This object maps to TR-159/G.998.3 attribute aFECWordSize."
REFERENCE
"[TR-159] 5.5.4.7; [G.998.3] Appendix II, B-XI"
::= { gBondTdimPortConfEntry 2 }
Beili Expires December 2, 2010 [Page 14]
Internet-Draft G.Bond/TDIM MIB May 2010
gBondTdimFecRedundancySize OBJECT-TYPE
SYNTAX Unsigned32(0|2|4|8|16|20)
UNITS "octets"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A FEC redundancy word size in octets for the G.Bond/TDIM
ports supporting FEC function.
This object is read-write for the GBS-C ports and read-only
for the GBS-R.
A value of zero SHALL be returned if the FEC is disabled
(via gBondTdimFecAdminState) or not supported.
Changing of the FEC redundancy word size MUST be performed
when the FEC enabled link is Down. Attempts to change this
object MUST be rejected, if the link is Up or Initializing or
the FEC function is disabled/not supported.
This object MUST be maintained in a persistent manner.
This object maps to TR-159/G.998.3 attribute
aFECRedundancySize."
REFERENCE
"[TR-159] 5.5.4.8; [G.998.3] Appendix II, B-XII"
::= { gBondTdimPortConfEntry 3 }
gBondTdimFecInterleaverType OBJECT-TYPE
SYNTAX INTEGER {
none(0),
block(1),
convolution(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An Interleaver type for the G.Bond/TDIM ports supporting
FEC function.
This object is read-write for the GBS-C ports and read-only
for the GBS-R.
A value of none(0) SHALL be returned if the FEC is disabled
(via gBondTdimFecAdminState) or not supported.
Changing of the Interleaver type MUST be performed when the
FEC enabled link is Down. Attempts to change this object MUST
Beili Expires December 2, 2010 [Page 15]
Internet-Draft G.Bond/TDIM MIB May 2010
be rejected, if the link is Up or Initializing or the FEC
function is disabled/not supported.
This object MUST be maintained in a persistent manner.
This object maps to TR-159/G.998.3 attribute
aFECInterleaverType."
REFERENCE
"[TR-159] 5.5.4.9; [G.998.3] Appendix II, B-XIII"
::= { gBondTdimPortConfEntry 4 }
gBondTdimFecInterleaverDepth OBJECT-TYPE
SYNTAX Unsigned32(0|1|2|3|4|6|8|12|16|24|32|48|96)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An Interleaver Depth for the G.Bond/TDIM ports supporting
FEC function.
This object is read-write for the GBS-C ports and read-only
for the GBS-R.
A value of zero SHALL be returned if the FEC is disabled
(via gBondTdimFecAdminState) or not supported.
Changing of the Interleaver Depth MUST be performed when the
FEC enabled link is Down. Attempts to change this object MUST
be rejected, if the link is Up or Initializing or the FEC
function is disabled/not supported.
This object MUST be maintained in a persistent manner.
This object maps to TR-159/G.998.3 attribute
aFECInterleaverDepth."
REFERENCE
"[TR-159] 5.5.4.10; [G.998.3] Appendix II, B-XIV"
::= { gBondTdimPortConfEntry 5 }
gBondTdimAdminServices OBJECT-TYPE
SYNTAX GBondTdimServiceIndexList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Desired list of services for a G.Bond/TDIM port. This object is
a list of pointers to entries in the gBondTdimServiceTable.
The value of this object is a continuous ordered list of up to
60 indices (gBondTdimServiceIdx) of the active services carried
Beili Expires December 2, 2010 [Page 16]
Internet-Draft G.Bond/TDIM MIB May 2010
via the G.Bond/TDIM link.
This object is writable and readable for the GBS-C ports.
It is irrelevant for the GBS-R ports - a zero-length octet
string SHALL be returned on an attempt to read this object and
an attempt to change this object MUST be rejected in this case.
Note that the current operational service list is available
via the gBondTdimOperServiceTable object.
This object for a GBS-C port MAY be modified independently of
the link's state, i.e. in- and out-of-service.
Attempts to set this object to a list with a member value that
is not the value of the index for an active entry in the
corresponding gBondTdimServiceTable table MUST be rejected.
This object MUST be maintained in a persistent manner."
REFERENCE
"[G.998.3] 10.2.3, 13.3.4.6-13.3.4.11"
::= { gBondTdimPortConfEntry 6 }
gBondTdimServiceUpDownEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether gBondTdimServiceUp and gBondTdimServiceDown
notifications should be generated for this interface.
Value of true(1) indicates that the notifications are enabled.
Value of false(2) indicates that the notifications are
disabled.
This object MUST be maintained in a persistent manner.
This object maps to the TR-159 attribute
aServiceUpDownEnable."
REFERENCE
"[TR-159] 5.5.5.6"
::= { gBondTdimPortConfEntry 7 }
gBondTdimPortCapabilityTable OBJECT-TYPE
SYNTAX SEQUENCE OF GBondTdimPortCapabilityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for Capabilities of G.Bond/TDIM ports. Entries in this
Beili Expires December 2, 2010 [Page 17]
Internet-Draft G.Bond/TDIM MIB May 2010
table MUST be maintained in a persistent manner."
::= { gBondTdimPort 2 }
gBondTdimPortCapabilityEntry OBJECT-TYPE
SYNTAX GBondTdimPortCapabilityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the G.Bond/TDIM port Capability table.
Each entry represents an G.Bond/TDIM port indexed by the
ifIndex. Additional capabilities are available via the
gBondPortCapabilityEntry of GBOND-MIB.
Note that a G.Bond/TDIM port runs on top of a single
or multiple BCE port(s), which are also indexed by ifIndex."
INDEX { ifIndex }
::= { gBondTdimPortCapabilityTable 1 }
GBondTdimPortCapabilityEntry ::=
SEQUENCE {
gBondTdimFecSupported TruthValue,
gBondTdimFecMaxWordSize Unsigned32,
gBondTdimFecMaxRedundancySize Unsigned32,
gBondTdimFecInterleaverTypeSupported INTEGER,
gBondTdimFecMaxInterleaverDepth Unsigned32
}
gBondTdimFecSupported OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"FEC and Interleaver Capability of the G.Bond/TDIM port.
This object has a value of true(1) when the port supports the
FEC and Interleaver function.
A value of false(2) is returned when the port does not
support the FEC and Interleaver function.
This object maps to the TR-159/G.998.3 attribute
aFECSupported."
REFERENCE
"[TR-159] 5.5.4.4; [G.998.3] Appendix II, B-VI"
::= { gBondTdimPortCapabilityEntry 1 }
gBondTdimFecMaxWordSize OBJECT-TYPE
SYNTAX Unsigned32(0|20..255)
UNITS "octets"
MAX-ACCESS read-only
STATUS current
Beili Expires December 2, 2010 [Page 18]
Internet-Draft G.Bond/TDIM MIB May 2010
DESCRIPTION
"A Maximum supported FEC code word size in octets for the
G.Bond/TDIM ports with FEC function.
A value of zero SHALL be returned if the FEC is not supported.
This object partially maps to TR-159/G.998.3 attribute
aFECWordSize"
REFERENCE
"[TR-159] 5.5.4.11; [G.998.3] Appendix II, B-XI"
::= { gBondTdimPortCapabilityEntry 2 }
gBondTdimFecMaxRedundancySize OBJECT-TYPE
SYNTAX Unsigned32(0|2|4|8|16|20)
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A Maximum supported FEC redundancy word size in octets for
the G.Bond/TDIM ports with FEC function.
A value of zero SHALL be returned if the FEC is not supported.
This object maps to TR-159 attribute
aFECMaxRedundancySize."
REFERENCE
"[TR-159] 5.5.4.12; [G.998.3] Appendix II, B-XII"
::= { gBondTdimPortCapabilityEntry 3 }
gBondTdimFecInterleaverTypeSupported OBJECT-TYPE
SYNTAX INTEGER {
none(0),
block(1),
convolution(2),
blockConvolution(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Suported Interleaver types for the G.Bond/TDIM ports with
FEC function.
Possible values are:
none - the port does not support interleaving
block - the port supports Block Interleaver
convolution - the port supports Convolution Interleaver
blockConvolution - the port supports both Block and
Convolution Interleaver
Beili Expires December 2, 2010 [Page 19]
Internet-Draft G.Bond/TDIM MIB May 2010
This object partially maps to TR-159 attribute
aFECInterleaverTypesSupported."
REFERENCE
"[TR-159] 5.5.4.13; [G.998.3] Appendix II, B-XIII"
::= { gBondTdimPortCapabilityEntry 4 }
gBondTdimFecMaxInterleaverDepth OBJECT-TYPE
SYNTAX Unsigned32(0|1|2|3|4|6|8|12|16|24|32|48|96)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A Maximum Interleaver Depth for the G.Bond/TDIM ports with
FEC function.
A value of zero SHALL be returned if the Interleaver is not
supported.
This object partially maps to TR-159 attribute
aFECMaxInterleaverDepth."
REFERENCE
"[TR-159] 5.5.4.14; [G.998.3] Appendix II, B-XIV"
::= { gBondTdimPortCapabilityEntry 5 }
gBondTdimPortStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF GBondTdimPortStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides overall status information of G.Bond
TDIM ports, complementing the generic status information from
the ifTable of IF-MIB and gBondFltStatus of GBOND-MIB.
Additional status information about connected BCEs is
available from the relevant line MIBs.
This table contains live data from the equipment. As such,
it is NOT persistent."
::= { gBondTdimPort 3 }
gBondTdimPortStatusEntry OBJECT-TYPE
SYNTAX GBondTdimPortStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the G.Bond/TDIM port Status table.
Each entry represents a G.Bond/TDIM port indexed by the
ifIndex.
Note that an G.Bond GBS port runs on top of a single
Beili Expires December 2, 2010 [Page 20]
Internet-Draft G.Bond/TDIM MIB May 2010
or multiple BCE port(s), which are also indexed by ifIndex."
INDEX { ifIndex }
::= { gBondTdimPortStatusTable 1 }
GBondTdimPortStatusEntry ::=
SEQUENCE {
gBondTdimFecOperState TruthValue,
gBondTdimFltStatus BITS,
gBondTdimCrc4Errors Counter32,
gBondTdimCrc6Errors Counter32,
gBondTdimCrc8Errors Counter32
}
gBondTdimFecOperState OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only value, indicating current operational state of
the OPTIONAL Forward Error Correction (FEC) function for the
G.998.3 port.
A value of 'false' indicates that the FEC function is
disabled. A value of 'true' indicates that the FEC function
is enabled (and supported).
This object maps to TR-159 attribute aFECOperState."
REFERENCE
"[TR-159] 5.5.4.6"
::= { gBondTdimPortStatusEntry 1 }
gBondTdimFltStatus OBJECT-TYPE
SYNTAX BITS {
serviceDown(0),
wrongConfig(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"G.Bond/TDIM port Fault Status. This is a bitmap of possible
conditions. The various bit positions are:
serviceDown - at least one of the services defined
for this aggregation group is down
(due to low rate).
wrongConfig - at least one BCE at the remote GBS-R
is already connected to another GBS.
This object is intended to supplement ifOperStatus object
in IF-MIB and gBondFltStatus in GBOND-MIB."
Beili Expires December 2, 2010 [Page 21]
Internet-Draft G.Bond/TDIM MIB May 2010
REFERENCE
"G.998.3 Section 6.3;
IF-MIB, ifOperStatus; GBOND-MIB, gBondFltStatus"
::= { gBondTdimPortStatusEntry 2 }
gBondTdimCrc4Errors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of CRC-4 errors (frame header error) on all
pairs in the G.Bond/TDIM port. Simultaneous errors on M lines
SHOULD be counted M times.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other times
as indicated by the value of ifCounterDiscontinuityTime,
defined in IF-MIB.
This object maps to TR-159/G.998.3 attribute aCRC4Errors."
REFERENCE
"[TR-159] 5.5.4.1; [G.998.3] Appendix II, B-VII"
::= { gBondTdimPortStatusEntry 3 }
gBondTdimCrc6Errors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of CRC-6 errors (super-frame error) on all
pairs in the G.Bond/TDIM port. Simultaneous errors on M lines
SHOULD be counted 1 time.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other times
as indicated by the value of ifCounterDiscontinuityTime,
defined in IF-MIB.
This object maps to TR-159/G.998.3 attribute aCRC6Errors."
REFERENCE
"[TR-159] 5.5.4.2; [G.998.3] Appendix II, B-VIII"
::= { gBondTdimPortStatusEntry 4 }
gBondTdimCrc8Errors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
Beili Expires December 2, 2010 [Page 22]
Internet-Draft G.Bond/TDIM MIB May 2010
"The total number of CRC-8 errors (event/message error) on all
pairs in the G.Bond/TDIM port. Simultaneous errors on M lines
SHOULD be counted M times.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other times
as indicated by the value of ifCounterDiscontinuityTime,
defined in IF-MIB.
This object maps to TR-159/G.998.3 attribute aCRC8Errors."
REFERENCE
"[TR-159] 5.5.4.3; [G.998.3] Appendix II, B-IX"
::= { gBondTdimPortStatusEntry 5 }
gBondTdimOperServiceTable OBJECT-TYPE
SYNTAX SEQUENCE OF GBondTdimOperServiceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of the operational Services configured on a G.Bond/TDIM
port. This table reflects current actual service configuration,
set by the gBondTdimAdminServices object. The number of entries
(services) in this table is therefore can vary between 0, when
no services are configured, and 60, for the maximum number of
services.
This table contains live data from the equipment. As such,
it is NOT persistent."
::= { gBondTdimPort 4 }
gBondTdimOperServiceEntry OBJECT-TYPE
SYNTAX GBondTdimOperServiceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the G.Bond/TDIM Port Operational Service table,
containing the index of an active Service entry in the
gBondTdimServiceTable. The entry is indexed by ifIndex,
indicating corresponding G.Bond/TDIM port, and by
gBondTdimServicePosition (1..60), indicating the corresponding
service position in the G.Bond/TDIM frame."
INDEX { ifIndex, gBondTdimServicePosition }
::= { gBondTdimOperServiceTable 1 }
GBondTdimOperServiceEntry ::=
SEQUENCE {
gBondTdimServicePosition GBondTdimServiceOrderIndex,
gBondTdimServiceOperIdx GBondTdimServiceIndex,
Beili Expires December 2, 2010 [Page 23]
Internet-Draft G.Bond/TDIM MIB May 2010
gBondTdimServiceOperState INTEGER
}
gBondTdimServicePosition OBJECT-TYPE
SYNTAX GBondTdimServiceOrderIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"G.Bond/TDIM operational Service position - a unique index,
indicating relative placement of the associated service
pointed by gBondTdimServiceOperIdx, within the G.Bond/TDIM frame.
There can be up to 60 services defined over TDIM bonded
facility. Services with lower indices have higher priority in
case of bandwidth degradation.
The value of gBondTdimServicePosition for the first
gBondTdimOperServiceEntry is always 1, incrementing sequentially
for each consequtive entry, i.e. 2 for the second entry, 3 for
the third etc.
This objects maps to TR-159/G.998.3 attribute aServiceID."
REFERENCE
"[TR-159] 5.5.5.1; [G.998.3] Appendix II, C-I"
::= { gBondTdimOperServiceEntry 1 }
gBondTdimServiceOperIdx OBJECT-TYPE
SYNTAX GBondTdimServiceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"G.Bond/TDIM operational Service index - a read-only pointer to
an existing entry in the gBondTdimServiceTable (value of
gBondTdimServiceIdx), describing a particular service."
REFERENCE
""
::= { gBondTdimOperServiceEntry 2 }
gBondTdimServiceOperState OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"G.Bond/TDIM Service Operational State.
Beili Expires December 2, 2010 [Page 24]
Internet-Draft G.Bond/TDIM MIB May 2010
Possible values are:
up - Service is up passing traffic.
down - Service is down, due to a variety of
reasons, e.g. G.Bond/TDIM port is
down, current link bandwidth is too
low to support a particular service,
etc.
This objects maps to TR-159 attribute aServiceOperState."
REFERENCE
"[TR-159] 5.5.5.5"
::= { gBondTdimOperServiceEntry 3 }
gBondTdimServiceTable OBJECT-TYPE
SYNTAX SEQUENCE OF GBondTdimServiceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of possible Services for a G.Bond/TDIM ports.
Entries in this table MUST be maintained in a persistent
manner"
::= { gBondTdimPort 5 }
gBondTdimServiceEntry OBJECT-TYPE
SYNTAX GBondTdimServiceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the G.Bond/TDIM Port Service table, containing
the management information applicable to a particular Service,
indexed by the gBondTdimServiceIdx, on a G.Bond/TDIM port,
indexed by the ifIndex."
INDEX { ifIndex, gBondTdimServiceIdx }
::= { gBondTdimServiceTable 1 }
GBondTdimServiceEntry ::=
SEQUENCE {
gBondTdimServiceIdx GBondTdimServiceIndex,
gBondTdimServiceIfIdx InterfaceIndex,
gBondTdimServiceType INTEGER,
gBondTdimServiceSize Unsigned32,
gBondTdimServiceRowStatus RowStatus
}
gBondTdimServiceIdx OBJECT-TYPE
SYNTAX GBondTdimServiceIndex
MAX-ACCESS not-accessible
STATUS current
Beili Expires December 2, 2010 [Page 25]
Internet-Draft G.Bond/TDIM MIB May 2010
DESCRIPTION
"G.Bond/TDIM Service index - a unique index associated with
a particular service entry."
REFERENCE
""
::= { gBondTdimServiceEntry 1 }
gBondTdimServiceIfIdx OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is a unique index within the ifTable. It represents
the interface index of a service to be transmitted over the
G.Bond/TDIM service instance.
This objects maps to TR-159 attribute aServiceIfIndex."
REFERENCE
"[TR-159] 5.5.5.2"
::= { gBondTdimServiceEntry 2 }
gBondTdimServiceType OBJECT-TYPE
SYNTAX INTEGER {
ds1(0),
e1(1),
nxds0(2),
nxe0(3),
ds3(4),
e3(5),
clock(6),
ethernet(7),
atm(8),
gfpNoFCS(9),
gfp(10)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"G.Bond/TDIM Service Type.
Possible values are:
ds1 - Clear Channel DS1 (synchronous)
e1 - Clear Channel E1 (synchronous)
nxds0 - Fractional DS1 (synchronous)
nxe0 - Fractional E1 (synchronous)
ds3 - DS3 (synchronous)
e3 - E3 (synchronous)
clock - Clock transfer (synchronous)
Beili Expires December 2, 2010 [Page 26]
Internet-Draft G.Bond/TDIM MIB May 2010
ethernet - Ethernet (asynchronous)
atm - ATM (asynchronous)
gfpNoFCS - GFP encapsulated without FCS (asynchronous)
gfp - GFP encapsulated with FCS (asynchronous)
For the GBS-R ports, the value of this object cannot be
changed directly. This value may be changed as a result of
writing operation on the gBondTdimServiceType object of a
remote GBS-C.
Attempts to change this object MUST be rejected for the GBS-R
ports.
This object MUST be maintained in a persistent manner.
This object maps to TR-159/G.998.3 attribute aServiceType."
REFERENCE
"[TR-159] 5.5.5.3; [G.998.3] Appendix II, C-II"
::= { gBondTdimServiceEntry 3 }
gBondTdimServiceSize OBJECT-TYPE
SYNTAX Unsigned32(0|20..255)
UNITS "octets"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Service size in octets per bonding sub-block for a specific
service identified by gBondTdimServiceIdx.
For TDM (synchronous) services with variable size
e.g. fractional DS1/E1 - this object represents the number of
DS0/E0 channels.
For asynchronous services (Ethernet, ATM, GFPnoFCS or GFP) -
this object represents max. number of octets.
For non-fractional TDM services, i.e. DS1, E1, DS3, E3 and
Clock, the value of this object MUST be 0.
A GET operation returns current value.
A SET operation, allowed on GBS-C ports, changes the service
size to the indicated value. If the service type is a fixed
rate synchronous service (gBondTdimServiceType is nxds0, nxe0,
ds1, e1, ds3, e3 or clock), the operation MUST be rejected.
This object MUST be maintained in a persistent manner.
This object maps to TR-159/G.998.3 attribute aServiceSize."
REFERENCE
"[TR-159] 5.5.5.4; [G.998.3] Appendix II, C-III"
Beili Expires December 2, 2010 [Page 27]
Internet-Draft G.Bond/TDIM MIB May 2010
::= { gBondTdimServiceEntry 4 }
gBondTdimServiceRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object controls the creation, modification, or deletion
of the associated entry in the gBondTdimServiceTable per the
semantics of RowStatus.
If an 'active' entry is referenced via gBondTdimServiceOperIdx
or gBondTdimAdminServices instance or indexes a
gBondTdimServicePerf*Entry, the entry MUST remain
'active'.
An 'active' entry SHALL NOT be modified. In order to modify an
existing entry, it MUST be taken out of service (by setting
this object to 'notInService'), modified, and set 'active'
again."
::= { gBondTdimServiceEntry 5 }
-------------------------------
-- Performance Monitoring group
-------------------------------
gBondTdimPM OBJECT IDENTIFIER ::= { gBondTdimPort 6 }
gBondTdimPortPerfCurrTable OBJECT-TYPE
SYNTAX SEQUENCE OF GBondTdimPortPerfCurrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains current Performance Monitoring information
for a G.Bond/TDIM port. This table contains live data from the
equipment and as such is NOT persistent."
::= { gBondTdimPM 1 }
gBondTdimPortPerfCurrEntry OBJECT-TYPE
SYNTAX GBondTdimPortPerfCurrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the G.Bond/TDIM Port PM table.
Each entry represents an G.Bond/TDIM port indexed by the
ifIndex."
INDEX { ifIndex }
Beili Expires December 2, 2010 [Page 28]
Internet-Draft G.Bond/TDIM MIB May 2010
::= { gBondTdimPortPerfCurrTable 1 }
GBondTdimPortPerfCurrEntry ::=
SEQUENCE {
gBondTdimPortPerf15MinValidIntervals HCPerfValidIntervals,
gBondTdimPortPerf15MinInvalidIntervals HCPerfInvalidIntervals,
gBondTdimPortPerfCurr15MinTimeElapsed HCPerfTimeElapsed,
gBondTdimPortPerfCurr15MinCrc4s HCPerfCurrentCount,
gBondTdimPortPerfCurr15MinCrc6s HCPerfCurrentCount,
gBondTdimPortPerfCurr15MinCrc8s HCPerfCurrentCount,
gBondTdimPortPerf1DayValidIntervals Unsigned32,
gBondTdimPortPerf1DayInvalidIntervals Unsigned32,
gBondTdimPortPerfCurr1DayTimeElapsed HCPerfTimeElapsed,
gBondTdimPortPerfCurr1DayCrc4s HCPerfCurrentCount,
gBondTdimPortPerfCurr1DayCrc6s HCPerfCurrentCount,
gBondTdimPortPerfCurr1DayCrc8s HCPerfCurrentCount
}
gBondTdimPortPerf15MinValidIntervals OBJECT-TYPE
SYNTAX HCPerfValidIntervals
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only number of 15-minute intervals for which the
performance data was collected. The value of this object will
be 96 or the maximum number of 15-minute history intervals
collected by the implementation unless the measurement was
(re-)started recently, in which case the value will be the
number of complete 15 minutes intervals for which there are at
least some data.
In certain cases it is possible that some intervals are
unavailable. In this case, this object reports the maximum
interval number for which data is available.
This object partially maps to the TR-159 attribute
aGroupPerf15MinValidIntervals."
REFERENCE
"[TR-159] 5.5.1.32"
::= { gBondTdimPortPerfCurrEntry 1 }
gBondTdimPortPerf15MinInvalidIntervals OBJECT-TYPE
SYNTAX HCPerfInvalidIntervals
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only number of 15-minute intervals for which the
performance data was not always available. The value will
typically be zero except in cases where the data for some
Beili Expires December 2, 2010 [Page 29]
Internet-Draft G.Bond/TDIM MIB May 2010
intervals are not available.
This object partially maps to the TR-159 attribute
aGroupPerf15MinInvalidIntervals."
REFERENCE
"[TR-159] 5.5.1.33"
::= { gBondTdimPortPerfCurrEntry 2 }
gBondTdimPortPerfCurr15MinTimeElapsed OBJECT-TYPE
SYNTAX HCPerfTimeElapsed
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of seconds that have elapsed since the
beginning of the current 15-minute performance history interval.
This object partially maps to the TR-159 attribute
aGroupPerfCurr15MinTimeElapsed."
REFERENCE
"[TR-159] 5.5.1.34"
::= { gBondTdimPortPerfCurrEntry 3 }
gBondTdimPortPerfCurr15MinCrc4s OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of CRC-4 errors (frame header errors) on all
active pairs in the G.Bond/TDIM port during the current
15-minute performance history interval.
Simultaneous errors on M lines SHOULD be counted M times.
Note that the total number of CRC-4 errors is indicated by the
gBondTdimCrc4Errors object.
This object is inhibited during Severely Errored Seconds (SES)
or Unavailable Seconds (UAS)."
REFERENCE
"[TR-159] 5.5.4.1"
::= { gBondTdimPortPerfCurrEntry 4}
gBondTdimPortPerfCurr15MinCrc6s OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of CRC-6 errors (super-frame errors) on all
active pairs in the G.Bond/TDIM port during the current
Beili Expires December 2, 2010 [Page 30]
Internet-Draft G.Bond/TDIM MIB May 2010
15-minute performance history interval.
Simultaneous errors on M lines SHOULD be counted 1 time.
Note that the total number of CRC-6 errors is indicated by the
gBondTdimCrc6Errors object.
This object is inhibited during Unavailable Seconds (UAS)."
REFERENCE
"[TR-159] 5.5.4.2"
::= { gBondTdimPortPerfCurrEntry 5}
gBondTdimPortPerfCurr15MinCrc8s OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of CRC-8 errors (event/message errors) on all
active pairs in the G.Bond/TDIM port during the current
15-minute performance history interval.
Simultaneous errors on M lines SHOULD be counted M times.
Note that the total number of CRC-8 errors is indicated by the
gBondTdimCrc8Errors object.
This object is inhibited during Unavailable Seconds (UAS)."
REFERENCE
"[TR-159] 5.5.4.3"
::= { gBondTdimPortPerfCurrEntry 6}
gBondTdimPortPerf1DayValidIntervals OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only number of 1-day intervals for which data was
collected. The value of this object will be 7 or the maximum
number of 1-day history intervals collected by the
implementation unless the measurement was (re-)started recently,
in which case the value will be the number of complete 1-day
intervals for which there are at least some data.
In certain cases it is possible that some intervals are
unavailable. In this case, this object reports the maximum
interval number for which data is available."
REFERENCE
"[TR-159] 5.5.1.45"
::= { gBondTdimPortPerfCurrEntry 7 }
gBondTdimPortPerf1DayInvalidIntervals OBJECT-TYPE
Beili Expires December 2, 2010 [Page 31]
Internet-Draft G.Bond/TDIM MIB May 2010
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only number of 1-day intervals for which data was
not always available. The value will typically be zero except in
cases where the data for some intervals are not available."
REFERENCE
"[TR-159] 5.5.1.46"
::= { gBondTdimPortPerfCurrEntry 8 }
gBondTdimPortPerfCurr1DayTimeElapsed OBJECT-TYPE
SYNTAX HCPerfTimeElapsed
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of seconds that have elapsed since the
beginning of the current 1-day performance history interval."
REFERENCE
"[TR-159] 5.5.1.47"
::= { gBondTdimPortPerfCurrEntry 9 }
gBondTdimPortPerfCurr1DayCrc4s OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of CRC-4 errors on the G.Bond/TDIM port in
the current 1-day performance history interval.
This object is inhibited during Severely Errored Seconds (SES)
and Unavailable Seconds (UAS)."
REFERENCE
""
::= { gBondTdimPortPerfCurrEntry 10 }
gBondTdimPortPerfCurr1DayCrc6s OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of CRC-6 errors on the G.Bond/TDIM port
in the current 1-day performance history interval.
This object is inhibited during Unavailable Seconds (UAS)."
REFERENCE
""
::= { gBondTdimPortPerfCurrEntry 11 }
Beili Expires December 2, 2010 [Page 32]
Internet-Draft G.Bond/TDIM MIB May 2010
gBondTdimPortPerfCurr1DayCrc8s OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count ofCRC-8 on the G.Bond/TDIM port in
the current 1-day performance history interval.
This object is inhibited during Unavailable Seconds (UAS)."
REFERENCE
""
::= { gBondTdimPortPerfCurrEntry 12 }
-- Port PM history: 15-min buckets
gBondTdimPortPerf15MinTable OBJECT-TYPE
SYNTAX SEQUENCE OF GBondTdimPortPerf15MinEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains historical 15-minute buckets of Performance
Monitoring information for a G.Bond/TDIM port (a row for each
15-minute interval, up to 96 intervals).
Entries in this table MUST be maintained in a persistent manner."
::= { gBondTdimPM 2 }
gBondTdimPortPerf15MinEntry OBJECT-TYPE
SYNTAX GBondTdimPortPerf15MinEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the G.Bond/TDIM Port historical 15-minute PM table.
Each entry represents performance monitoring data for a G.Bond
TDIM port, indexed by ifIndex, collected during a particular
15-minute interval, indexed by
gBondTdimPortPerf15MinIntervalIndex."
INDEX { ifIndex, gBondTdimPortPerf15MinIntervalIndex }
::= { gBondTdimPortPerf15MinTable 1 }
GBondTdimPortPerf15MinEntry ::=
SEQUENCE {
gBondTdimPortPerf15MinIntervalIndex Unsigned32,
gBondTdimPortPerf15MinIntervalMoniTime HCPerfTimeElapsed,
gBondTdimPortPerf15MinIntervalCrc4s HCPerfIntervalCount,
gBondTdimPortPerf15MinIntervalCrc6s HCPerfIntervalCount,
gBondTdimPortPerf15MinIntervalCrc8s HCPerfIntervalCount,
gBondTdimPortPerf15MinIntervalValid TruthValue
}
Beili Expires December 2, 2010 [Page 33]
Internet-Draft G.Bond/TDIM MIB May 2010
gBondTdimPortPerf15MinIntervalIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..96)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Performance Data Interval number. 1 is the most recent previous
interval; interval 96 is 24 hours ago.
Intervals 2..96 are OPTIONAL.
This object partially maps to the TR-159 attribute
aGroupPerf15MinIntervalNumber."
REFERENCE
"[TR-159] 5.5.1.57"
::= { gBondTdimPortPerf15MinEntry 1 }
gBondTdimPortPerf15MinIntervalMoniTime OBJECT-TYPE
SYNTAX HCPerfTimeElapsed
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of seconds over which the performance data
was actually monitored. This value will be the same as the
interval duration (900 seconds), except in a situation where
performance data could not be collected for any reason."
::= { gBondTdimPortPerf15MinEntry 2 }
gBondTdimPortPerf15MinIntervalCrc4s OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of CRC-4 errors on the G.Bond/TDIM port
during the 15-minute performance history interval.
This object is inhibited during Severely Errored Seconds (SES)
and Unavailable Seconds (UAS)."
REFERENCE
""
::= { gBondTdimPortPerf15MinEntry 3 }
gBondTdimPortPerf15MinIntervalCrc6s OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of CRC-6 erorrs on the G.Bond/TDIM port
during the 15-minute performance history interval.
Beili Expires December 2, 2010 [Page 34]
Internet-Draft G.Bond/TDIM MIB May 2010
This object is inhibited during Unavailable Seconds (UAS)."
REFERENCE
""
::= { gBondTdimPortPerf15MinEntry 4 }
gBondTdimPortPerf15MinIntervalCrc8s OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of CRC-8 errors on the G.Bond/TDIM port
during the current 15-minute performance history interval.
This object is inhibited during Unavailable Seconds (UAS)."
REFERENCE
""
::= { gBondTdimPortPerf15MinEntry 5 }
gBondTdimPortPerf15MinIntervalValid OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only object indicating whether or not this history
bucket contains valid data. Valid bucket is reported as true(1)
and invalid bucket as false(2).
If this history bucket is invalid the BTU-C MUST NOT produce
notifications based upon the value of the counters in this
bucket.
Note that an implementation may decide not to store invalid
history buckets in its data base. In such case this object is
not required as only valid history buckets are available while
invalid history buckets are simply not in the data base.
This object partially maps to the TR-159 attribute
aGroupPerf15MinIntervalValid."
REFERENCE
"[TR-159] 5.5.1.58"
::= { gBondTdimPortPerf15MinEntry 6 }
-- Port PM history: 1-day buckets
gBondTdimPortPerf1DayTable OBJECT-TYPE
SYNTAX SEQUENCE OF GBondTdimPortPerf1DayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains historical 1-day buckets of Performance
Beili Expires December 2, 2010 [Page 35]
Internet-Draft G.Bond/TDIM MIB May 2010
Monitoring information for a G.Bond/TDIM port (a row for each
1-day interval, up to 7 intervals).
Entries in this table MUST be maintained in a persistent manner."
::= { gBondTdimPM 3 }
gBondTdimPortPerf1DayEntry OBJECT-TYPE
SYNTAX GBondTdimPortPerf1DayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the G.Bond/TDIM port historical 1-day PM table.
Each entry represents performance monitoring data for such port,
indexed by ifIndex, collected during a particular 1-day
interval, indexed by gBondTdimPortPerf1DayIntervalIndex."
INDEX { ifIndex, gBondTdimPortPerf1DayIntervalIndex }
::= { gBondTdimPortPerf1DayTable 1 }
GBondTdimPortPerf1DayEntry ::=
SEQUENCE {
gBondTdimPortPerf1DayIntervalIndex Unsigned32,
gBondTdimPortPerf1DayIntervalMoniTime HCPerfTimeElapsed,
gBondTdimPortPerf1DayIntervalCrc4s HCPerfIntervalCount,
gBondTdimPortPerf1DayIntervalCrc6s HCPerfIntervalCount,
gBondTdimPortPerf1DayIntervalCrc8s HCPerfIntervalCount,
gBondTdimPortPerf1DayIntervalValid TruthValue
}
gBondTdimPortPerf1DayIntervalIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Performance Data Interval number. 1 is the most recent previous
interval; interval 7 is 24 hours ago.
Intervals 2..7 are OPTIONAL.
This object partially maps to the TR-159 attribute
aGroupPerf1DayIntervalNumber."
REFERENCE
"[TR-159] 5.5.1.62"
::= { gBondTdimPortPerf1DayEntry 1 }
gBondTdimPortPerf1DayIntervalMoniTime OBJECT-TYPE
SYNTAX HCPerfTimeElapsed
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of seconds over which the performance data
Beili Expires December 2, 2010 [Page 36]
Internet-Draft G.Bond/TDIM MIB May 2010
was actually monitored. This value will be the same as the
interval duration (86400 seconds), except in a situation where
performance data could not be collected for any reason.
This object partially maps to the TR-159 attribute
aGroupPerf1DayIntervalMoniSecs."
REFERENCE
"[TR-159] 5.5.1.64"
::= { gBondTdimPortPerf1DayEntry 2 }
gBondTdimPortPerf1DayIntervalCrc4s OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of CRC-4 errors on the G.Bond/TDIM port
during the 1-day performance history interval.
This object is inhibited during Severely Errored Seconds (SES)
and Unavailable Seconds (UAS)."
REFERENCE
""
::= { gBondTdimPortPerf1DayEntry 3 }
gBondTdimPortPerf1DayIntervalCrc6s OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of CRC-6 errors on the G.Bond/TDIM port
during the 1-day performance history interval.
This object is inhibited during Unavailable Seconds (UAS)."
REFERENCE
""
::= { gBondTdimPortPerf1DayEntry 4 }
gBondTdimPortPerf1DayIntervalCrc8s OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of CRC-6 errors on the G.Bond/TDIM port
during the current 1-day performance history interval.
This object is inhibited during Unavailable Seconds (UAS)."
REFERENCE
""
Beili Expires December 2, 2010 [Page 37]
Internet-Draft G.Bond/TDIM MIB May 2010
::= { gBondTdimPortPerf1DayEntry 5 }
gBondTdimPortPerf1DayIntervalValid OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only object indicating whether or not this history
bucket contains valid data. Valid bucket is reported as true(1)
and invalid bucket as false(2).
If this history bucket is invalid the BTU-C MUST NOT produce
notifications based upon the value of the counters in this
bucket.
Note that an implementation may decide not to store invalid
history buckets in its data base. In such case this object is
not required as only valid history buckets are available while
invalid history buckets are simply not in the data base.
This object partially maps to the TR-159 attribute
aGroupPerf1DayIntervalValid."
REFERENCE
"[TR-159] 5.5.1.63"
::= { gBondTdimPortPerf1DayEntry 6 }
-- Services PM
gBondTdimServicePerfCurrTable OBJECT-TYPE
SYNTAX SEQUENCE OF GBondTdimServicePerfCurrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains current Performance Monitoring information
for the services of a G.Bond/TDIM port.
This table contains live data from the equipment and as such is
NOT persistent."
::= { gBondTdimPM 4 }
gBondTdimServicePerfCurrEntry OBJECT-TYPE
SYNTAX GBondTdimServicePerfCurrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the G.Bond/TDIM Services PM table.
Each entry represents a service, indexed by the
gBondTdimServiceIdx, in a G.Bond/TDIM port, indexed by the
ifIndex."
INDEX { ifIndex, gBondTdimServiceIdx }
::= { gBondTdimServicePerfCurrTable 1 }
Beili Expires December 2, 2010 [Page 38]
Internet-Draft G.Bond/TDIM MIB May 2010
GBondTdimServicePerfCurrEntry ::=
SEQUENCE {
gBondTdimServicePerf15MinValidIntervals HCPerfValidIntervals,
gBondTdimServicePerf15MinInvalidIntervals HCPerfInvalidIntervals,
gBondTdimServicePerfCurr15MinTimeElapsed HCPerfTimeElapsed,
gBondTdimServicePerfCurr15MinDowns HCPerfCurrentCount,
gBondTdimServicePerf1DayValidIntervals Unsigned32,
gBondTdimServicePerf1DayInvalidIntervals Unsigned32,
gBondTdimServicePerfCurr1DayTimeElapsed HCPerfTimeElapsed,
gBondTdimServicePerfCurr1DayDowns HCPerfCurrentCount
}
gBondTdimServicePerf15MinValidIntervals OBJECT-TYPE
SYNTAX HCPerfValidIntervals
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only number of 15-minute intervals for which the
performance data was collected. The value of this object will
be 96 or the maximum number of 15-minute history intervals
collected by the implementation unless the measurement was
(re-)started recently, in which case the value will be the
number of complete 15 minutes intervals for which there are at
least some data.
In certain cases it is possible that some intervals are
unavailable. In this case, this object reports the maximum
interval number for which data is available.
This object partially maps to the TR-159 attribute
aGroupPerf15MinValidIntervals."
REFERENCE
"[TR-159] 5.5.1.32"
::= { gBondTdimServicePerfCurrEntry 1 }
gBondTdimServicePerf15MinInvalidIntervals OBJECT-TYPE
SYNTAX HCPerfInvalidIntervals
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only number of 15-minute intervals for which the
performance data was not always available. The value will
typically be zero except in cases where the data for some
intervals are not available.
This object partially maps to the TR-159 attribute
aGroupPerf15MinInvalidIntervals."
REFERENCE
"[TR-159] 5.5.1.33"
Beili Expires December 2, 2010 [Page 39]
Internet-Draft G.Bond/TDIM MIB May 2010
::= { gBondTdimServicePerfCurrEntry 2 }
gBondTdimServicePerfCurr15MinTimeElapsed OBJECT-TYPE
SYNTAX HCPerfTimeElapsed
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of seconds that have elapsed since the
beginning of the current 15-minute performance history interval.
This object partially maps to the TR-159 attribute
aGroupPerfCurr15MinTimeElapsed."
REFERENCE
"[TR-159] 5.5.1.34"
::= { gBondTdimServicePerfCurrEntry 3 }
gBondTdimServicePerfCurr15MinDowns OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of seconds in the current 15-minute
performance history interval, during which a particular TDIM
Service was 'down', as indicated by the
gBondTdimServiceOperState object.
This object is inhibited during Unavailable Seconds (UAS)."
REFERENCE
""
::= { gBondTdimServicePerfCurrEntry 4}
gBondTdimServicePerf1DayValidIntervals OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only number of 1-day performance history intervals for
which the data was collected. The value of this object will be
7 or the maximum number of 1-day history intervals collected by
the implementation unless the measurement was (re-)started
recently, in which case the value will be the number of complete
1-day intervals for which there are at least some data.
In certain cases it is possible that some intervals are
unavailable. In this case, this object reports the maximum
interval number for which data is available."
REFERENCE
"[TR-159] 5.5.1.45"
::= { gBondTdimServicePerfCurrEntry 5 }
Beili Expires December 2, 2010 [Page 40]
Internet-Draft G.Bond/TDIM MIB May 2010
gBondTdimServicePerf1DayInvalidIntervals OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only number of 1-day performance history intervals for
which the performance data was not always available. The value
will typically be zero except in cases where the data for some
intervals are not available."
REFERENCE
"[TR-159] 5.5.1.46"
::= { gBondTdimServicePerfCurrEntry 6 }
gBondTdimServicePerfCurr1DayTimeElapsed OBJECT-TYPE
SYNTAX HCPerfTimeElapsed
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of seconds that have elapsed since the
beginning of the current 1-day performance history interval."
REFERENCE
"[TR-159] 5.5.1.47"
::= { gBondTdimServicePerfCurrEntry 7 }
gBondTdimServicePerfCurr1DayDowns OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of seconds in the current 1-day performance
history interval, during which a particular TDIM Service was
'down', as indicated by the gBondTdimServiceOperState object.
This object is inhibited during Unavailable Seconds (UAS)."
REFERENCE
""
::= { gBondTdimServicePerfCurrEntry 8 }
-- Service PM history: 15-min buckets
gBondTdimServicePerf15MinTable OBJECT-TYPE
SYNTAX SEQUENCE OF GBondTdimServicePerf15MinEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains historical 15-minute buckets of Performance
Monitoring information for the Services of a G.Bond/TDIM port
(a multi-dimensional row for each 15-minute interval, up to 96
Beili Expires December 2, 2010 [Page 41]
Internet-Draft G.Bond/TDIM MIB May 2010
intervals).
Entries in this table MUST be maintained in a persistent manner."
::= { gBondTdimPM 5 }
gBondTdimServicePerf15MinEntry OBJECT-TYPE
SYNTAX GBondTdimServicePerf15MinEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the G.Bond/TDIM Services historical 15-minute PM
table.
Each entry represents performance monitoring data for a
particular Service, indexed by gBondTdimServiceIdx, in a G.Bond
TDIM port, indexed by ifIndex, collected during a particular
15-minute interval, indexed by
gBondTdimServicePerf15MinIntervalIndex."
INDEX { ifIndex, gBondTdimServiceIdx,
gBondTdimServicePerf15MinIntervalIndex }
::= { gBondTdimServicePerf15MinTable 1 }
GBondTdimServicePerf15MinEntry ::=
SEQUENCE {
gBondTdimServicePerf15MinIntervalIndex Unsigned32,
gBondTdimServicePerf15MinIntervalMoniTime HCPerfTimeElapsed,
gBondTdimServicePerf15MinIntervalDowns HCPerfIntervalCount,
gBondTdimServicePerf15MinIntervalValid TruthValue
}
gBondTdimServicePerf15MinIntervalIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..96)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Performance Data Interval number. 1 is the most recent previous
interval; interval 96 is 24 hours ago.
Intervals 2..96 are OPTIONAL.
This object partially maps to the TR-159 attribute
aGroupPerf15MinIntervalNumber."
REFERENCE
"[TR-159] 5.5.1.57"
::= { gBondTdimServicePerf15MinEntry 1 }
gBondTdimServicePerf15MinIntervalMoniTime OBJECT-TYPE
SYNTAX HCPerfTimeElapsed
MAX-ACCESS read-only
STATUS current
Beili Expires December 2, 2010 [Page 42]
Internet-Draft G.Bond/TDIM MIB May 2010
DESCRIPTION
"A read-only count of seconds over which the performance data
was actually monitored. This value will be the same as the
interval duration (900 seconds), except in a situation where
performance data could not be collected for any reason."
::= { gBondTdimServicePerf15MinEntry 2 }
gBondTdimServicePerf15MinIntervalDowns OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of seconds in the 15-minute performance
history interval, during which a particular TDIM Service was
'down', as indicated by the gBondTdimServiceOperState object.
This object is inhibited during Unavailable Seconds (UAS)."
REFERENCE
""
::= { gBondTdimServicePerf15MinEntry 3 }
gBondTdimServicePerf15MinIntervalValid OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only object indicating whether or not this history
bucket contains valid data. Valid bucket is reported as true(1)
and invalid bucket as false(2).
If this history bucket is invalid the BTU-C MUST NOT produce
notifications based upon the value of the counters in this
bucket.
Note that an implementation may decide not to store invalid
history buckets in its data base. In such case this object is
not required as only valid history buckets are available while
invalid history buckets are simply not in the data base.
This object partially maps to the TR-159 attribute
aGroupPerf15MinIntervalValid."
REFERENCE
"[TR-159] 5.5.1.58"
::= { gBondTdimServicePerf15MinEntry 4 }
-- Service PM history: 1-day buckets
gBondTdimServicePerf1DayTable OBJECT-TYPE
SYNTAX SEQUENCE OF GBondTdimServicePerf1DayEntry
MAX-ACCESS not-accessible
Beili Expires December 2, 2010 [Page 43]
Internet-Draft G.Bond/TDIM MIB May 2010
STATUS current
DESCRIPTION
"This table contains historical 1-day buckets of Performance
Monitoring information for the Services of a G.Bond/TDIM port
(a multi-dimensional row for each 1-day interval, up to 7
intervals).
Entries in this table MUST be maintained in a persistent manner."
::= { gBondTdimPM 6 }
gBondTdimServicePerf1DayEntry OBJECT-TYPE
SYNTAX GBondTdimServicePerf1DayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the G.Bond/TDIM Service historical 1-day PM table.
Each entry represents performance monitoring data for a
particular Service, indexed by gBondTdimServiceIdx, defined in a
G.Bond/TDIM port, indexed by ifIndex, collected during a
particular 1-day interval, indexed by
gBondTdimServicePerf1DayIntervalIndex."
INDEX { ifIndex, gBondTdimServiceIdx,
gBondTdimServicePerf1DayIntervalIndex }
::= { gBondTdimServicePerf1DayTable 1 }
GBondTdimServicePerf1DayEntry ::=
SEQUENCE {
gBondTdimServicePerf1DayIntervalIndex Unsigned32,
gBondTdimServicePerf1DayIntervalMoniTime HCPerfTimeElapsed,
gBondTdimServicePerf1DayIntervalDowns HCPerfIntervalCount,
gBondTdimServicePerf1DayIntervalValid TruthValue
}
gBondTdimServicePerf1DayIntervalIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Performance Data Interval number. 1 is the most recent previous
interval; interval 7 is 24 hours ago.
Intervals 2..7 are OPTIONAL.
This object partially maps to the TR-159 attribute
aGroupPerf1DayIntervalNumber."
REFERENCE
"[TR-159] 5.5.1.62"
::= { gBondTdimServicePerf1DayEntry 1 }
gBondTdimServicePerf1DayIntervalMoniTime OBJECT-TYPE
Beili Expires December 2, 2010 [Page 44]
Internet-Draft G.Bond/TDIM MIB May 2010
SYNTAX HCPerfTimeElapsed
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of seconds over which the performance data
was actually monitored. This value will be the same as the
interval duration (86400 seconds), except in a situation where
performance data could not be collected for any reason.
This object partially maps to the TR-159 attribute
aGroupPerf1DayIntervalMoniSecs."
REFERENCE
"[TR-159] 5.5.1.64"
::= { gBondTdimServicePerf1DayEntry 2 }
gBondTdimServicePerf1DayIntervalDowns OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of seconds in the 1-day performance history
interval, during which a particular TDIM Service was 'down',
as indicated by the gBondTdimServiceOperState object.
This object is inhibited during Unavailable Seconds (UAS)."
REFERENCE
""
::= { gBondTdimServicePerf1DayEntry 3 }
gBondTdimServicePerf1DayIntervalValid OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only object indicating whether or not this history
bucket contains valid data. Valid bucket is reported as true(1)
and invalid bucket as false(2).
If this history bucket is invalid the BTU-C MUST NOT produce
notifications based upon the value of the counters in this
bucket.
Note that an implementation may decide not to store invalid
history buckets in its data base. In such case this object is
not required as only valid history buckets are available while
invalid history buckets are simply not in the data base.
This object partially maps to the TR-159 attribute
aGroupPerf1DayIntervalValid."
REFERENCE
Beili Expires December 2, 2010 [Page 45]
Internet-Draft G.Bond/TDIM MIB May 2010
"[TR-159] 5.5.1.63"
::= { gBondTdimServicePerf1DayEntry 4 }
--
-- Conformance Statements
--
gBondTdimGroups OBJECT IDENTIFIER
::= { gBondTdimConformance 1 }
gBondTdimCompliances OBJECT IDENTIFIER
::= { gBondTdimConformance 2 }
-- Object Groups
gBondTdimBasicGroup OBJECT-GROUP
OBJECTS {
gBondTdimAdminServices,
gBondTdimCrc4Errors,
gBondTdimCrc6Errors,
gBondTdimCrc8Errors,
gBondTdimFecSupported,
gBondTdimServicePosition,
gBondTdimServiceOperIdx,
gBondTdimServiceOperState,
gBondTdimServiceIfIdx,
gBondTdimServiceType,
gBondTdimServiceSize,
gBondTdimServiceRowStatus,
gBondTdimFltStatus
}
STATUS current
DESCRIPTION
"A collection of objects representing management information
for G.Bond/TDIM ports."
::= { gBondTdimGroups 1 }
gBondTdimFecGroup OBJECT-GROUP
OBJECTS {
gBondTdimFecSupported,
gBondTdimFecAdminState,
gBondTdimFecOperState,
gBondTdimFecWordSize,
gBondTdimFecRedundancySize,
gBondTdimFecInterleaverType,
gBondTdimFecInterleaverDepth,
gBondTdimFecMaxWordSize,
Beili Expires December 2, 2010 [Page 46]
Internet-Draft G.Bond/TDIM MIB May 2010
gBondTdimFecMaxRedundancySize,
gBondTdimFecInterleaverTypeSupported,
gBondTdimFecMaxInterleaverDepth
}
STATUS current
DESCRIPTION
"A collection of objects supporting OPTIONAL Forward Error
Correction (FEC) and Interleaver function in G.Bond/TDIM
ports."
::= { gBondTdimGroups 2 }
gBondTdimAlarmConfGroup OBJECT-GROUP
OBJECTS {
gBondTdimServiceUpDownEnable
}
STATUS current
DESCRIPTION
"A collection of objects required for configuration of alarm
thresholds and notifications in G.Bond/TDIM ports."
::= { gBondTdimGroups 3 }
gBondTdimNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS {
gBondTdimServiceUp,
gBondTdimServiceDown
}
STATUS current
DESCRIPTION
"This group supports notifications of significant conditions
associated with G.Bond/TDIM ports."
::= { gBondTdimGroups 4 }
gBondTdimPerfCurrGroup OBJECT-GROUP
OBJECTS {
gBondTdimPortPerf15MinValidIntervals,
gBondTdimPortPerf15MinInvalidIntervals,
gBondTdimPortPerfCurr15MinTimeElapsed,
gBondTdimPortPerfCurr15MinCrc4s,
gBondTdimPortPerfCurr15MinCrc6s,
gBondTdimPortPerfCurr15MinCrc8s,
gBondTdimPortPerf1DayValidIntervals,
gBondTdimPortPerf1DayInvalidIntervals,
gBondTdimPortPerfCurr1DayTimeElapsed,
gBondTdimPortPerfCurr1DayCrc4s,
gBondTdimPortPerfCurr1DayCrc6s,
gBondTdimPortPerfCurr1DayCrc8s,
gBondTdimServicePerf15MinValidIntervals,
gBondTdimServicePerf15MinInvalidIntervals,
Beili Expires December 2, 2010 [Page 47]
Internet-Draft G.Bond/TDIM MIB May 2010
gBondTdimServicePerfCurr15MinTimeElapsed,
gBondTdimServicePerfCurr15MinDowns,
gBondTdimServicePerf1DayValidIntervals,
gBondTdimServicePerf1DayInvalidIntervals,
gBondTdimServicePerfCurr1DayTimeElapsed,
gBondTdimServicePerfCurr1DayDowns
}
STATUS current
DESCRIPTION
"A collection of objects supporting OPTIONAL current Performance
Monitoring information for G.Bond/TDIM ports."
::= { gBondTdimGroups 5 }
gBondTdimPerf15MinGroup OBJECT-GROUP
OBJECTS {
gBondTdimPortPerf15MinIntervalMoniTime,
gBondTdimPortPerf15MinIntervalCrc4s,
gBondTdimPortPerf15MinIntervalCrc6s,
gBondTdimPortPerf15MinIntervalCrc8s,
gBondTdimPortPerf15MinIntervalValid,
gBondTdimServicePerf15MinIntervalMoniTime,
gBondTdimServicePerf15MinIntervalDowns,
gBondTdimServicePerf15MinIntervalValid
}
STATUS current
DESCRIPTION
"A collection of objects supporting OPTIONAL historical
Performance Monitoring information for G.Bond/TDIM ports, during
previous 15-minute intervals ."
::= { gBondTdimGroups 6 }
gBondTdimPerf1DayGroup OBJECT-GROUP
OBJECTS {
gBondTdimPortPerf1DayIntervalMoniTime,
gBondTdimPortPerf1DayIntervalCrc4s,
gBondTdimPortPerf1DayIntervalCrc6s,
gBondTdimPortPerf1DayIntervalCrc8s,
gBondTdimPortPerf1DayIntervalValid,
gBondTdimServicePerf1DayIntervalMoniTime,
gBondTdimServicePerf1DayIntervalDowns,
gBondTdimServicePerf1DayIntervalValid
}
STATUS current
DESCRIPTION
"A collection of objects supporting OPTIONAL historical
Performance Monitoring information for G.Bond/TDIM ports, during
previous 1-day intervals ."
::= { gBondTdimGroups 7 }
Beili Expires December 2, 2010 [Page 48]
Internet-Draft G.Bond/TDIM MIB May 2010
-- Compliance Statements
gBondTdimCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for G.Bond/TDIM interfaces.
Compliance with the following external compliance statements
is REQUIRED:
MIB Module Compliance Statement
---------- --------------------
IF-MIB ifCompliance3
GBOND-MIB gBondCompliance"
MODULE -- this module
MANDATORY-GROUPS {
gBondTdimBasicGroup,
gBondTdimAlarmConfGroup,
gBondTdimNotificationGroup
}
GROUP gBondTdimFecGroup
DESCRIPTION
"Support for this group is only required for implementations
supporting G.Bond FEC and Interleaver function."
GROUP gBondTdimPerfCurrGroup
DESCRIPTION
"Support for this group is only required for implementations
supporting Performance Monitoring."
GROUP gBondTdimPerf15MinGroup
DESCRIPTION
"Support for this group is only required for implementations
supporting historical Performance Monitoring."
GROUP gBondTdimPerf1DayGroup
DESCRIPTION
"Support for this group is only required for implementations
supporting historical Performance Monitoring."
::= { gBondTdimCompliances 1 }
END
Beili Expires December 2, 2010 [Page 49]
Internet-Draft G.Bond/TDIM MIB May 2010
7. Security Considerations
There is a number of managed objects defined in the GBOND-TDIM-MIB
module that have a MAX-ACCESS clause of read-write or read-create.
Most objects are writeable only when the link is down. Writing to
these objects can have potentially disruptive effects on network
operation, for example:
o Changing of gBondTdimAdminServices object MAY lead to a potential
service disruption, by changing a particular service' position
(therefore changing its drop priority) or even removing the
service from the link alltogether.
o Changing of gBondTdimServiceTable configuration paratemers (e.g.
gBondTdimServiceType or gBondTdimServiceSize) MAY lead to a
potential service impairment, for example a TDM service would be
dropped if there is not enough actual bandwidth on the bonded link
to support this service.
o Changing of gBondTdimPortConfTable configuration parameters (e.g.
gBondTdimFecAdminState) MAY lead to anything from link quality and
rate degradation to a complete link initialization failure.
The user of the GBOND-TDIM-MIB module must therefore be aware that
support for SET operations in a non-secure environment without proper
protection can have a negative effect on network operations.
The readable objects in the GBOND-TDIM-MIB module (i.e., those with
MAX-ACCESS other than not-accessible) may be considered sensitive in
some environments since, collectively, they provide information about
the performance of network interfaces and can reveal some aspects of
their configuration.
In such environments it is important to control also GET and NOTIFY
access to these objects and possibly even to encrypt their values
when sending them over the network via SNMP.
SNMP versions prior to SNMPv3 did not include adequate security.
Even if the network itself is secure (for example by using IPSec),
even then, there is no control as to who on the secure network is
allowed to access and GET/SET (read/change/create/delete) the objects
in this MIB module.
It is RECOMMENDED that implementers consider the security features as
provided by the SNMPv3 framework (see [RFC3410], section 8),
including full support for the SNMPv3 cryptographic mechanisms (for
authentication and privacy).
Beili Expires December 2, 2010 [Page 50]
Internet-Draft G.Bond/TDIM MIB May 2010
Further, deployment of SNMP versions prior to SNMPv3 is NOT
RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to
enable cryptographic security. It is then a customer/operator
responsibility to ensure that the SNMP entity giving access to an
instance of this MIB module is properly configured to give access to
the objects only to those principals (users) that have legitimate
rights to indeed GET or SET (change/create/delete) them.
8. IANA Considerations
An object identifier for gBondTdimMIB MODULE-IDENTITY SHALL be
allocated by IANA [1] in the MIB-2 transmission sub-tree, before this
document is published as an RFC.
9. Acknowledgments
This document was produced by the [ADSLMIB] working group.
10. References
10.1. Normative References
[G.998.3] ITU-T, "Multi-pair bonding using time-
division inverse multiplexing", ITU-T
Recommendation G.998.3, January 2005, <
http://www.itu.int/rec/T-REC-
G.998.3/en>.
[I-D.ietf-adslmib-gbond-mib] Beili, E. and M. Morgenstern, "xDSL
multi-pair bonding (G.Bond) MIB",
draft-ietf-adslmib-gbond-mib-04 (work
in progress), May 2010.
[RFC2119] Bradner, S., "Key words for use in RFCs
to Indicate Requirement Levels",
BCP 14, RFC 2119, March 1997.
[RFC2578] McCloghrie, K., Ed., Perkins, D., Ed.,
and J. Schoenwaelder, Ed., "Structure
of Management Information Version 2
(SMIv2)", STD 58, RFC 2578, April 1999.
[RFC2579] McCloghrie, K., Ed., Perkins, D., Ed.,
and J. Schoenwaelder, Ed., "Textual
Conventions for SMIv2", STD 58,
RFC 2579, April 1999.
[RFC2580] McCloghrie, K., Perkins, D., and J.
Beili Expires December 2, 2010 [Page 51]
Internet-Draft G.Bond/TDIM MIB May 2010
Schoenwaelder, "Conformance Statements
for SMIv2", STD 58, RFC 2580,
April 1999.
[RFC2863] McCloghrie, K. and F. Kastenholz, "The
Interfaces Group MIB", RFC 2863,
June 2000.
[RFC3410] Case, J., Mundy, R., Partain, D., and
B. Stewart, "Introduction and
Applicability Statements for Internet-
Standard Management Framework",
RFC 3410, December 2002.
[RFC3705] Ray, B. and R. Abbi, "High Capacity
Textual Conventions for MIB Modules
Using Performance History Based on 15
Minute Intervals", RFC 3705,
February 2004.
[TR-159] Beili, E. and M. Morgenstern,
"Management Framework for xDSL
Bonding", Broadband Forum technical
report TR-159, December 2008.
10.2. Informative References
[ADSLMIB] IETF, "ADSL MIB (adslmib) Charter", <ht
tp://www.ietf.org/html.charters/
adslmib-charter.html>.
[G.704] ITU-T, "Synchronous frame structures
used at 1544, 6312, 2048, 8448 and
44736 Kbit/s hierarchical levels.",
ITU-T Recommendation G.704,
October 1998,
<http://www.itu.int/rec/T-REC-
G.704/en>.
[RFC3593] Tesink, K., "Textual Conventions for
MIB Modules Using Performance History
Based on 15 Minute Intervals",
RFC 3593, September 2003.
[RFC4181] Heard, C., "Guidelines for Authors and
Reviewers of MIB Documents", BCP 111,
RFC 4181, September 2005.
Beili Expires December 2, 2010 [Page 52]
Internet-Draft G.Bond/TDIM MIB May 2010
URIs
[1] <http://www.iana.org/>
Author's Address
Edward Beili
Actelis Networks
25 Bazel St.
Petach-Tikva 49103
Israel
Phone: +972-3-924-3491
EMail: edward.beili@actelis.com
Beili Expires December 2, 2010 [Page 53]